Clear Acrylic Square Tube

Acrylic (Perspex) is manufactured in to many different shapes..the two main processes are by Extrusion OR Continuous / Casting.
 

1. Extruded Acrylic TUBE exhibits a good clarity and a good impact strength, but due to this process the TUBE can only be supplied from 5mm O.Dia. up to 350mm O.Diameter and lengths X normally 2 Metres.
    
2. Extruded Acrylic ROD exhibits a good clarity and a good impact strength, but due to this process the ROD can only be supplied from 3mm O.Dia. up to 90mm O.Diameter and lengths X normally 2 Metres.
    
3. Continuous / CAST Acrylic TUBE exhibits excellent clarity, high impact strength, but due to this process the TUBE is normally supplied in lengths of 1.0 to 1.2 Metres long.However the wall thickness can be supplied thicker to suit heavier applications.sizes start at 127mm O.Dia. & go up to 1000mm in O.Diameter.
   From 127 to 350 O.Dia. the lengths are 1.2 Metres Long.
   From 400 to 600 O.Dia. the lengths are 1.0 Metres Long.
   From 800 to 1000 O.Dia. the lengths are 2.0 Metres Long
    
4. Continuous CAST Acrylic TUBE exhibits excellent clarity, high impact strength, but due to this process the TUBE is normally supplied in lengths of 1.2 to 2.0 Metres long. From 652 to  685mm O.Dia.
    
5. Clear Acrylic SATIN Finish TUBE is used for mainly lighting applications,  from Pop up Displays to lighting effects as LED's can be placed down the centre of the TUBE
    
6. Clear Acrylic BUBBLE ROD is used for many applications,  from back lit Stair Case Supports to hanging Chandeliers.the effects can be further optimised by using colour LED's.
    
7. Clear Acrylic HALVE Round ROD is used for many applications,  as the light refracts off the SOLID clear acrylic Halve round section casting shadows in every direction.
    
8. OPAL Acrylic TUBE is used for mainly on lighting applications, from Fluorescent light displays, and lighting effects for Pop up Displays.

Click here to view the Square Rod Tube sizes